A portable, rugged IP67 multi-parameter electrochemical instrument for fast, accurate determination of pH, temperature, electrical conductivity, dissolved oxygen, total dissolved solids, salinity, and oxidation/reduction potential. The waterproof (IP67) housing is ergonomically designed and ruggedised for field use, with an acid-resistant enclosure and a rigid, protected LCD display screen. The individual industrial-quality submersible sensors, with waterproof connectors, are mountable in multi-sensor sonde housing for ease
of handling. The housing includes a 3 metre cable as standard, optionally extendable to 15 metres. The entire solution is housed in
a waterproof carry case, inclusive of meter, electrodes, accessories and calibration solutions, offering a fully field-ready kit for portable electrochemical water quality monitoring.
The HydroTest HT1000 Photometer combines a modern, ergonomic design, with reliable, laboratory-quality optics, incorporated into a waterproof carry case with accessories and reagents, for a complete environmental water testing solution. The ergonomic design is equally stable in the palm of the hand, or on a flat surface. The backlit high-contrast display enables comfortable operation in all lighting conditions. The simple test methods, intuitive control system and comprehensive manual are ideally suited for operators of all abilities. Precision optics combine long-life LEDs with interference filters and a highly accurate photo sensor for highly reliable results. N.I.S.T.-traceable calibration capability and verification standards assure continued validity and reliability. Over 120 test methods are available, including all of the most important water quality parameters, and methods can be easily updated by users. Data can be stored directly on the unit (up to 1000 data sets), or wirelessly transmitted to PC or printer. The robust IP68-rated waterproof enclosure is built for tough environments, allowing operation in all weather conditions. The waterproof hard-shell carry-case is resiliant yet lightweight, offering a complete portable solution for environmental monitoring.
Turbidity, or cloudiness, has often been considered a superb first line indicator of water quality. Turbidity may be caused by growth of phytoplankton. Human activities that disturb land, such as construction, mining and agriculture, can lead to high sediment levels entering water bodies.. Erosion rates contribute large amounts of turbidity to nearby waters, and industries such as quarrying, mining and coal recovery can generate very high levels of turbidity from colloidal rock particles. High turbidity levels can reduce the amount of light reaching lower depths, which can inhibit growth of submerged aquatic plants, reducing oxygen levels. In drinking water, the higher the turbidity level, the higher the risk that people may develop gastrointestinal diseases. Suspended solids interfere with water disinfection with chlorine because the particles act as shields for the virus and bacteria. Similarly, suspended solids can protect bacteria from UV sterilisation of water. The HTTURB IR turbidity meter offers fast, precise on-site testing using the industry standard nephelometric method (scattered light at an angle of 90°). The wide range makes this a multi-purpose instrument for a variety of possible applications and the IR light source ensures suitability for both coloured and colourless liquids. The unit comes complete with calibration standards and accessories, packaged in a hard shell carry case.
HydroTest COD System
The HydroTest COD System HTCOD is designed for the determination of chemical oxygen demand index (COD) using the small-scale sealed-tube method. The industry standard dichromate method can be considered as an estimate of theoretical oxygen demand. With a wide measuring range from 0 – 15,000 mg/L O2, the HTCOD is ideal for waste water testing, offering a small handheld photometer with two LED light sources housed inside a waterproof sample chamber. The highly-sensitive equipment is compatible with mercury-free tube tests, with optional chloride compensation to remove interference, and utilises the popular photometric determination method. Standard solutions can be used to verify operation and accuracy of the instrument. The thermoreactor is compatible with other products in the HydroTest range, and can also be utilised for tube test digestion of TOC, total Chromium total Nitrogen and total Phosphate. The thermoreactor operates at three pre-set temperatures, with three pre-set reaction times, and offers automatic switch-off functionality with audible alarm.
HL101 Pocket pH/°C/°F Meter
A highly accurate pocket pH meter, offering 1 to 3 points calibration functionality with auto-buffer recognition for USA and NIST standards. Automatic temperature compensation provides accurate readings across the entire measurement range. The round glass bulb electrode is perfectly suited for measuring the pH of liquids. Equipped with a high-clarity LCD display, the HL101 is designed for maximum ease of use, with auto-hold functionality to freeze a stable reading for ease of recording. A visible battery indicator and auto-off functions effectively conserve and communicate battery life to the user. A fully replaceable electrode module reduces maintenance costs.
HL102 Pocket Conductivity / TDS / Salinity Meter
A powerful multi-parameter pocket conductivity meter, including TDS and salinity measurement modes. The platinum-based electrode module offers fast, reliable results and is fully replaceable for reduced maintenance costs. The TDS conversion factor is adjustable to suit a plethora of different measurement requirements. The meter offers 1 to 3 points calibration functionality with automatic calibration solution recognition. Automatic temperature compensation provides accurate readings across the entire measurement range. The HL102 is designed for ease of use, with auto-hold functionality to freeze a stable reading for ease of recording. A visible battery indicator and auto-off functions effectively conserve and communicate battery life to the user.for 200 tests.
HL103 Pocket Dissolved Oxygen Meter
A simple pocket dissolved oxygen meter using an industry-standard polarographic DO probe, offering 1 or 2 point calibration using air-saturated water or zero oxygen solution. Automatic temperature compensation, and manual salinity and barometric pressure compensation improve accuracy across the entire measurement range. The HL103 is designed for ease of use, with auto-hold functionality to freeze a stable reading for ease of recording. A visible battery indicator and auto-off functions effectively conserve and communicate battery life to the user. A fully replaceable electrode module reduces maintenance costs.
HL104 Pocket Oxygen Reproduction Potential Meter
Economical pocket ORP tester with relative and absolute millivolt measurement modes. The meter is suitable for measuring the oxidation reduction potential of samples, accuracy: 2mV.
1 point offset calibration allows adjusting the displayed value to a known standard. With relative and absolute millivolt modes ensure the reliable ORP measurements. The unit has a replaceable electrode module reduces maintenance and replacement cost.
The probe has a waterproof feature to ensure complete protection in harsh environments
Multiple kits are an expensive and cumbersome way to test for multiple parameters in the field. The HydroKit total is designed to give a user flexibility to choose the best possible probe for purpose by supplying all four single parameter probes in one kit, from simple digital measurement to a wider range of more complex and accurate testing. The HydroKit total comes complete in a rugged waterproof case to ensure the safety and protection of the instruments inside.
The most simple of the HydroKit range offers basic water quality analysis using the pocket meters for both pH and conductivity/TDS, along with a high quality comparator block with colour wheels and reagents for ammonia, chlorine (residual and total), nitrate and nitrite. The kit also includes a 2-part Jackson turbidity tube with threaded locking for one-handed operation.
A mid range water quality analysis kit including 2 separate pocket meters for pH and conductivity from the HydroLite range, and a quality multi-parameter photometer (HT1000) for a broad range of chemical tests and turbidity. The waterproof carry case also contains reagent for ammonia, chlorine (residual and total), nitrate and also calibration buffers for the pocket meters.
This high level physico-chemical kit includes both a multi-parameter photometer and multi-parameter electrochemistry meter to give enhanced accuracy in all areas of water quality testing. The kit also includes a dedicated turbidity meter for high accuracy testing in NTU and a rapid visual system for the testing of total Arsenic. A comprehensive kit for a complete field testing programme.
A rapid and highly accurate trace heavy metals analyser measuring to ppb levels in the field is added to the HydroKit Pro 3000 to create this complete kit.
Trace2o HydroKit HK6000 Portable Electronic Physico-Chemical Water Testing Kit. The Kit comprises 4 instruments and all accessories.
-The HT1000 Photometer
-The HC1000 Multi-parameter Meter
-HydroTest Turbidity HTTURB
-Trace2o Metalyser Field Pro HM3000
When a wider range of chemical tests may be required, or the flexibility to add tests at a later date is desirable, a comparator block using the wheel comparator method is a great choice.
-Fast and simple testing of multiple chemical parameters
-Easy to switch between tests simply by inserting a different wheel
-Chemical reagents can be purchased separately saving money and storage space, giving maximum flexibility
-A wide range of chemical tests available
BASIC POOLTESTER BLOCK
When fast and easy testing of chlorine or pH levels is required, nothing could be easier than a simple pooltester method using the DPD or phenol red tablet system.
-High quality rugged block with dual chamber chlorine/pH measurement
-Easy integrated colour comparison chart
-Chlorine chamber able to measure both residual (free) and total chlorine
-Uses standard DPD1 and 3 tablets for chlorine testing and phenol red for pH testing